• Teflon Pillow for Heat Press, heat transfer, DTF, DTG | Manutech-Print
  • Teflon Pillow for Heat Press, heat transfer, DTF, DTG | Manutech-Print
  • Teflon Pillow for Heat Press, heat transfer, DTF, DTG | Manutech-Print
Teflon Pillow for Heat Press, heat transfer, DTF, DTG | Manutech-Print zoom_in

Teflon Pillow for Heat Press

  • Reference: CouPETX4

€42.90 Tax excluded

In stock, please contact us for delivery.

Teflon pillow for heat press, sets of 4 sizes. Protect the t-shirt to be personalised during your textile transfers.

Description

Teflon pillow for heat press is made from foam covered with Teflon sheet. Set of 4 Teflon pillows of different sizes and thickness of 10 mm. They consist of a heat resistant foam pad with a non-stick Teflon cover. It slips easily into clothes.

Why use a textile heat press PET pad?

Teflon (PET) pillow allow you to isolate the work area to mark your textile and thus compensate for the different thicknesses where you want to place your pattern.

The heat press cushion protects the clothes to be personalised during your transfers. Holdfasts, buttons, and seams usually prevent you from getting a flat surface on your garment.

Without Teflon pressing pad, the heat press top platen may not properly press and heat on the heat transfer vinyl film. This causes an even pressure, which can prevent the transfer from sticking well to the surface of your T-shirt.

The 10 mm thick Teflon pillows are delivered in a set of 4:

  • 13 cm × 13 cm For use on T-shirts with a pocket or baby bodysuit;
  • 13 cm × 38 cm Ideal for sleeves and legs;
  • 25 cm × 25 cm Tote bag to personalise or otherwise;
  • 30 cm × 38 cm Suitable for adult clothing, especially with a zip and/or buttons.