zoom_in
Schulze Mug Sublimation Tunnel Oven KN65300U
- Reference: GS72394
€26,900.00 Tax excluded
Description
The Schulze Mug Sublimation Tunnel Oven KN65300U is a conveyor oven built for continuous sublimation of mugs and containers. Its 300 cm heating zone and 65 cm wide conveyor make it a production machine. According to the manufacturer, it reaches about 500 mugs per hour, an indicative value that depends on speed and product. It runs on 400 V three-phase power, which must be planned before installation.
What are the KN65300U specifications?
The main data of the KN65300U tunnel oven are gathered in the table below.
| Specification | Value |
|---|---|
| Heating zone length | 300 cm |
| Conveyor and heating zone width | 65 cm |
| Infeed length | 50 cm |
| Maximum object height | 25 cm |
| Adjustable transit time | 7 to 25 minutes |
| Maximum hot air temperature | 220 °C |
| Maximum power | 26.4 kW, reduced to 18 kW at low speed |
| Power supply | 400 V three-phase, 50-60 Hz |
| Total connected load | 29 kW |
| Main circuit breaker | 50 A |
| Dimensions | 420 x 126 x 174 cm |
| Weight including packaging | 800 kg |
How does the KN65300U move mugs through the heat?
The KN65300U moves mugs along a conveyor through a heating zone. Processing is therefore continuous, with no loading one mug at a time, which suits production runs.
From the touchscreen, the user sets the temperature and the transit time, between 7 and 25 minutes. A slower conveyor extends heat exposure, which benefits full-wrap designs and demanding materials.
The setting depends on the substrate and the ink, and each combination benefits from a test beforehand. At low speed, the maximum power of 26.4 kW can drop to 18 kW, which limits consumption during slow runs.
How is the heat distributed in the KN65300U?
The KN65300U spreads heat across three heating zones, each fitted with four heating elements. This layout aims for a stable temperature over the full height of the mug, from base to rim.
What must be planned to install the KN65300U?
The KN65300U requires a three-phase power supply and dedicated ventilation, two points to check before delivery.
- A 400 V three-phase supply, protected by a 50 A main fuse and connected to a 63 A, 5-pole socket;
- Two extraction hoods to connect to the workshop ventilation network;
- A location able to take a machine about 420 cm long.
The sturdy construction and integrated wheels make the machine easier to position. To move mugs to the tunnel, the Schulze transport trolley for sublimation mugs can be used.
How does the KN65300U ventilation limit fumes?
The two extraction hoods of the KN65300U prevent sublimation fumes from spreading through the workshop during operation.
Their connection is carried out by the installer, who checks the sizing of the existing ventilation network before commissioning.
Which containers can be sublimated in the KN65300U?
The KN65300U takes mugs and containers up to 25 cm high. For bottles and other shapes, silicone sleeves are ordered separately. Sleeves for mugs are also sold separately, such as the Schulze HotMug Simple Plus cuff.
Each sleeve is chosen according to the shape of the container to be sublimated, and a run benefits from a test beforehand. Sleeves are available for many types of vessel.
Which type of workshop is the KN65300U suited to?
The KN65300U suits workshops that print mugs in series. The machine carries the Schulze brand, with German design and European manufacture.