• Schulze Bowl Press heating sleeve for bowls of 130, 150 and 180 mm
Schulze Bowl Press heating sleeve for bowls of 130, 150 and 180 mm zoom_in

Schulze Bowl Press Heating Sleeve | Bowls Ø 130, 150, 180 mm

  • Reference: GS133901

€199.00 Tax excluded

Delivery within 5 to 7 days

Schulze Bowl Press heating sleeve for bowls of 130, 150 or 180 mm, to add to the bowl press.

Description

The Schulze Bowl Press heating sleeve surrounds the bowl during sublimation and passes the heat to the whole wall. It is chosen in three diameters, 130, 150 or 180 mm, to suit the bowls to be personalised.

As the press is supplied without a sleeve, it is added to the Schulze Bowl Press to make it ready to use.

Features of the Schulze Bowl Press heating sleeve

Before ordering, these points help to choose the right diameter:

  • Compatibility: Schulze Bowl Press bowl press, with two stations;
  • Diameters: 130, 150 or 180 mm, to be chosen according to the diameter of the bowl;
  • References: GS133900 for 130 mm, GS133901 for 150 mm, GS133902 for 180 mm;
  • Use: sublimation on bowls and pet bowls made for sublimation;
  • Type: wear part, to be replaced when it wears out;
  • Range: German design and European manufacturing.

Which sleeve diameter should be chosen for a bowl?

The heating sleeve is chosen according to the bowl diameter to be pressed. The same press can take several sleeves, which makes switching from one bowl size to another easy.

Sleeve diameters and matching bowls
SleeveBowl diameterSuitable bowls
Sleeve Ø 130 mm 130 mm Small bowls: desserts, cereals, gift sets
Sleeve Ø 150 mm 150 mm Everyday bowls: breakfast, soups, personalised tableware
Sleeve Ø 180 mm 180 mm Large bowls: salads, poke bowls, individual salad bowls

Why choose the Schulze Bowl Press heating sleeve?

The Schulze Bowl Press heating sleeve follows the wall of the bowl, which gives an even transfer of the print where a flat platen cannot follow the shape.

Schulze describes carefully made sleeves, intended to give good print results on bowls and pet bowls. The sleeve remains a wear part: keeping a spare avoids stopping production when a sleeve reaches the end of its life.

To personalise bowls of different sizes, keeping one sleeve per diameter avoids changing press from one batch to the next. Restaurants, caterers, hotels and gift shops thus go from the dessert bowl to the large salad bowl in a few moves.

More parts and equipment are found among the heat press accessories.

Is the heating sleeve supplied with the Bowl Press?

No, the Schulze Bowl Press is supplied without a heating sleeve. It is ordered separately, to match the diameter of the bowls to be personalised: 130, 150 or 180 mm.

In the same category

10 other products seleted for you