40 cm DTF printer supplies kit | Small and medium production

Description

The 40 cm DTF Supplies Kit brings together all the DTF consumables required to keep a 40 cm DTF printer running without interruption.

DTF film, white and CMYK DTF inks, DTF powder and DTF Cleaning Solution are all included in quantities designed for workshop use.

In a DTF workshop, a 40 cm DTF printer handles a wide range of jobs: short-run logos, multi-format graphics and on-demand custom transfers. To support this flexibility, consumables need to remain available in the right proportions.

Contents of the 40 cm DTF Consumables Kit

A 40 cm DTF printer sits between compact machines and 60 cm models. It allows wider prints than a 30 cm format without moving to a larger film width.

This direct-to-film supplies kit includes the DTF consumables used before, during and after printing.

• 4 rolls of 40 cm × 100 m DTF film
• 4 litres of white DTF ink
• 2 litres of each CMYK colour
• 10 kg of DTF powder
• 1 litre of DTF Cleaning Solution (soaking solution)
• 250 ml of Ultra Cleaning Solution

Estimated Output of the 40 cm DTF Supplies Kit

With 4 rolls of 40 cm × 100 m DTF film and 12 litres of combined ink, this kit allows you to print between 1,500 and 2,500 transfers, depending on their size and colour coverage.

The 10 kg of DTF powder supports the use of the film rolls included in the kit. The cleaning solutions help maintain printheads between production sessions. This reduces the risk of clogging and helps maintain consistent print quality.

Is the 40 cm Hot Peel Film Included in the Kit Compatible with All DTF Printers?

The Hot Peel DTF transfer film roll included in the 40 cm DTF Kit works with most professional DTF printers, including Brother GTX Pro DTF R2R, modified Epson printers, Audley, Oric, Sublistar, Atexco and STS Inks XPD models.

It works with both white and CMYK DTF inks to support consistent print quality.

Please check the maximum media width accepted by your printer before ordering.

How Often Should the Cleaning Solution and Ultra Cleaning Included in the Kit Be Used?

The DTF Cleaning Solution included in the 40 cm DTF Supplies Kit is intended for routine maintenance of the capping station. It helps keep printheads moist during downtime and reduces the risk of blockages.

Ultra Cleaning should only be used for occasional maintenance when persistent nozzle blockages occur. It is designed for printhead maintenance and should be used as a last resort to avoid unnecessary or overly aggressive cleaning procedures.

Is This Kit Suitable for On-Demand Production or Only for Production Runs?

Both. The 40 cm DTF Supplies Kit suits both repeated short runs and on-demand production. The quantities included help avoid unnecessary overstock while keeping the consumables required for several weeks of production, depending on your output volume.

Do You Work with a Smaller Format?

This direct-to-film supplies kit is designed for DTF printers producing transfers up to 40 cm wide.

If you mainly print A3 or smaller formats, take a look at our 30 cm DTF Supplies Kit, developed for short production runs.