Schulze POWDR | DTF Powder Shaker Dryer 40 cm

Description

Move to continuous DTF production with an automated production line. The Schulze POWDR DTF powder shaker dryer handles powdering and drying of DTF films up to 40 cm directly after printing.

It automatically manages powder feeding based on consumption. No refilling during production. A simple level check at the start of the day is enough.

The automatic DTF powder shaker allows up to 100 metres of DTF roll film without powder refilling. Production stays smooth from start to finish.

The workflow gains speed and consistency. Fewer manual steps, fewer errors, and better profitability on long runs.

Features of the Schulze POWDR DTF powder shaker dryer

Key specifications to run the machine in continuous DTF production.

• Working width 420 mm
  Compatible with standard 40 cm DTF films. Suitable for automated, compact and semi-industrial DTF lines.
• Synchronization with DTF printer
  The Schulze powder shaker dryer follows the printer speed without slowing down production. It prevents bottlenecks in the workflow.
• Continuous DTF production up to 100 metres
  A full DTF roll can run without interruption. The line remains smooth from start to finish.
• Integrated thermal protection (~280°C)
  The powdering and drying system automatically stops in case of overheating. Film and components remain protected.
• Power supply 200–240 V single-phase, 50 Hz
  Connection to standard installation with European plug. Use appropriate electrical protection.

Benefits of the Schulze POWDR DTF system

Key advantages to structure a DTF production line.

• No manual handling
  Powdering and drying run automatically. The operator no longer handles the film between steps.
• Consistent quality across the entire run
  Powder is evenly distributed across the printed surface. Output remains consistent from the first to the last metre.
• Production speed aligned with the DTF printer
  The machine follows the printing speed without slowing down. It avoids mid-line bottlenecks.
• Adjustable settings for each job
  Heating power, belt speed and powder amount can be adjusted based on film and artwork.

Integration of the Schulze powder shaker dryer in a DTF line

Compatible withe the GTXpro DTF R2R the Schulze DTF POWDR is installed directly after the DTF printer. The film enters the machine without manual handling. The workflow stays continuous.

The professional DTF machine must be aligned with the printer to centre the film. Enough space around the machine allows smooth roll feeding and handling.

The conveyor speed is set slightly higher than the printer speed. This avoids film tension and ensures smooth movement.

At the output, the transfer film can be sent to cutting or directly to a heat press. Integration with a DTF cutter helps structure a complete production line.

One operator can manage the whole process. They start the production and monitor the workflow.

Which workshops need a DTF powder shaker dryer?

The Schulze DTF POWDR suits workshops working with roll-based DTF production and regular output requirements.

It fits businesses that want to automate powdering and remove manual steps between printing and drying. The gain comes from reduced labour time and consistent powder application.

This machine is suitable for:

• DTF workshops using roll printers in 40 cm format
• Series production of DTF transfers with repeated volumes
• DTF workshops looking to automate powdering and save time