DTF printer 4 Heads & curing/shaker set 60 cm | DL60X4FV

Description

Optimise your textile transfer production with the DTF printer with 4 Epson I3200 print heads and DL60X4FV Vertical Powder Shaker/Dryer 60 cm, a complete solution designed to reduce your production costs.

This DTF printer delivers outstanding print quality with sharp detail and vibrant colours. Equipped with 4 Epson I3200-A1 printheads, it reaches a speed of 20 to 30 linear metres per hour, making it ideal for high-volume production.

The package includes a 60 cm DTF printer and a vertical DTF powder shaker / dryer of your choice:

• GEN 2 powder shaker / dryer: Compatible up to 30 linear metres per hour;
• GEN 3 powder shaker / dryer with integrated air filtration: Compatible up to 60 linear metres per hour.

The set includes a 60 cm wide DTF printer and a fully automated vertical DTF powder shaker/dryer. This combination enables continuous printing on PET film, automatic application of hot melt adhesive powder, and drying of prints before cutting and transfer. The production flow is optimised to minimise handling and reduce the risk of errors.

This professional configuration is designed for textile marking workshops and DTF printers looking to increase their output while lowering production costs. This turnkey package includes delivery and on-site installation in mainland France (other locations on request).

The DTF printer and curing unit come supplied with all the necessary consumables to start production immediately:

• DTF transfer Instant Peel film roll 60 cm x 100 m;
• White DTF Medium powder 2 kg;
• Premium white DTF ink 2 Litres;
• Premium cyan DTF ink | 1 Litre;
• Premium magenta DTF ink | 1 Litre;
• Premium yellow DTF ink | 1 Litre;
• Premium black DTF ink | 1 Litre;
• DTF Cleaning solution | 1 Litre;
• Ultra Cleaning solution DTF | 0.25 Litre.

With this starter pack for textile marking, every workshop gets a reliable and high-performance solution for DTF transfer. Instantly produce precise prints, vivid colours and maximum productivity from the very first use.

This DTF line is designed for you if:

• You run a textile printing workshop looking to bring DTF production in-house;
• You currently produce between 500 and 3,000 transfers per week;
• You want to upgrade from a 2-head printer to a faster solution.

Manutech-Print provides a dependable and productive solution for textile, DTF and customisation professionals.

Performance and accuracy of the DTF printer with 4 Epson I3200 print heads.

The DTF printer DL60X4FV features next-generation inkjet printing technology. Its four Epson I3200 print heads ensure excellent dot accuracy and high colour stability. The final result shows smooth gradients and sharply defined contours, even on the finest details.

The 60 cm print width allows multiple designs to be printed side by side, increasing output and reducing material waste. It is compatible with standard PET films and works with water-based DTF inks specifically formulated to deliver high opacity and strong wash resistance.

The white ink recirculation system prevents sedimentation and ensures continuous operation. An integrated auto-cleaning system preserves print quality and extends the print heads’ lifespan.

Technical advantages of the Direct to Film printer:

This Direct to Film printer combines production speed, multi-printhead configuration and industrial components to meet the requirements of professional DTF workshops.

• 4 EPSON I3200-A1 printheads;
• Production speed from 20 to 30 linear metres per hour depending on mode;
• 3 heating zones + printhead heating system;
• High-definition resolution for sharp and vibrant prints;
• 60 cm printable width for increased productivity;
• BYHX fibre optic mainboard and printhead boards;
• Automatic white ink circulation to reduce maintenance;
• Robust and rigid frame construction;
• Printer Manager software for machine control and adjustment;
• 230 V single-phase 16 A power supply.

Vertical GEN 2 and GEN 3 Powder Shaker / Dryers for DTF

The GEN 2 and GEN 3 vertical powder shaker / dryer modules perfectly complement the printer. They automate the essential post-printing stages: adhesive powder application, melting and film curing.

The hot-melt adhesive powder is applied evenly using an adjustable vibrating system. The film then passes through a heating tunnel that melts the powder to ensure strong ink adhesion. A final cooling fan stabilises the media before automatic rewinding.

This process delivers a consistent and durable finish while reducing manual handling. It allows continuous production runs and significantly increases productivity. Manutech-Print recommends connecting the fume outlet (Ø125 mm) to an external extraction system.

Vertical GEN 2 Powder Shaker / Dryer

The GEN 2 version provides a compact vertical solution designed for DTF workshops targeting production up to 30 linear metres per hour.

• Compatible up to 30 linear metres per hour (2 or 4 printheads);
• 2 independent heating zones;
• 2 independent suction zones;
• Automatic powder recirculation;
• Pre-heating plate before powder application;
• 230 V single-phase 32 A power supply;
• Requires external air extraction of 500 m³/h (not included).

Vertical GEN 3 Powder Shaker / Dryer with Integrated Filtration

The GEN 3 version suits workshops looking to increase output while gaining autonomy. It supports production up to 60 linear metres per hour and integrates an automatic industrial filtration system.

• Compatible up to 60 linear metres per hour (2, 4, 5 or 7 printheads);
• 3 independent heating zones;
• 2 independent suction zones;
• Automatic powder recirculation;
• Pre-heating plate before powder application;
• Integrated automatic industrial filtration system (no consumables);
• No external extraction required;
• Dual power supply: 230 V single-phase 32 A + 20 A;
• Touchscreen with intelligent automatic functions;
• Take-up roller positioned at working height.

Technical specifications

The GEN 2 suits workshops targeting up to 30 m/h and preferably requires external air extraction (500 m³/h). The GEN 3 is designed for high-volume production up to 60 m/h: it features integrated automatic industrial filtration, operates without external extraction and includes a touchscreen interface. It is the recommended solution for continuous, uninterrupted production.

DTF printing consumables: the Manutech-Print quality.

By ordering this high-speed DTF production line, you benefit from discounted prices on all DTF inks and films with delivery within 24 to 48 hours.

To ensure the best results, Manutech-Print offers a full range of premium DTF consumables. DTF inks provide excellent opacity, high wash resistance, and vibrant colours even on dark textiles. Their specific formulation reduces print head sediment and extends the printer’s lifespan.

The proposed DTF transfer films are stable and heat-resistant. They offer excellent hot or cold peel performance, resulting in clean, residue-free transfers. Available in various widths and roll sizes to suit every production workflow.

Finally, DTF cleaning solutions are designed to maintain the print heads and ink circuits. Regular use prevents clogs and ensures consistent print quality. All these consumables are in stock and available quickly to guarantee your production continuity.

What is the difference between the 2-head, 4-head and 5-head printer?

The DL60X2FV (2 heads) produces 12 to 15 linear metres per hour, making it ideal for start-ups. The DL60X4FV (4 heads) reaches 20–30 m/h and suits growing workshops. The DL60X5FV (5 heads) delivers up to 65 m/h for high-volume production.

Is air extraction required for the powder shaker / dryer?

This depends on the selected model. The GEN 2 requires external extraction (500 m³/h, Ø125 mm). The GEN 3 features integrated industrial filtration and operates without external extraction.

What consumables are supplied with the machine?

The package includes: 1 roll of 60 cm × 100 m DTF film, 2 kg of white medium DTF powder, 2 L of white ink + 1 L per CMYK colour, and cleaning solutions.

How much space should be planned in the workshop?

The overall footprint of the line is 177 × 221 cm. A minimum floor space of 260 × 350 cm is recommended to ensure comfortable operation and maintenance access.

Download

• DL60X4FV-DTF-printer - Information DL60X4FV DTF printer & Shaker dryer DTF

  Download