Schulze Powder Machine 600 V3 | DTF powder shaker dryer

Description

The Schulze Powder Machine 600 V3 DTF powder shaker dryer automates the full powdering and drying process on transfer film. Designed to work with DTF films coming from the printer up to 60 cm wide.

This powder shaker dryer runs each step without manual handling: preheating, powder application, excess removal, drying, then cooling and rewinding.

The DTF film comes out ready for cutting, with identical conditions across the entire production run.

Automated DTF powdering and drying

The machine completes an automated DTF line. It sits directly after the printer in a continuous DTF production workflow.

The printed film enters the powdering section, where hot-melt powder is applied evenly to the DTF inks. A system distributes the powder and removes the excess. Surplus powder is automatically collected and fed back into the circuit, without waste.

The transfer film then moves into a heating zone. The powder heats up and forms an even adhesive layer. The transfer becomes consistent and ready for the next steps.

Technical configuration built for DTF production

The 60 cm format of the Schulze Powder Machine 600 V3 matches the standards of professional DTF lines.

• Compatible with DTF rolls up to 600 mm wide
  The DTF powder shaker dryer accepts DTF rolls up to 60 cm wide, matching the most common production formats.
• Adjustable belt speed
  The belt speed follows the pace of the DTF printer without slowing down the line.
• Even temperature build-up
  Heat spreads evenly across the full width. DTF film drying remains clean, without under-treated areas.

Audio and visual alerts immediately signal anomalies to reduce defects and production stoppages.

Automatic DTF production management

The Schulze Powder Machine 600 adapts its operation according to production. When a stop occurs, it switches to energy-saving mode. The belt slows down and heating power decreases. During extended stops, the system shuts down automatically.

The Film End function allows a roll to finish cleanly. The DTF film remains held until the end, while the belt continues running to prevent drops or defects.

Technical and economic benefits of the Schulze 600 V3 powder shaker dryer

Automation of powdering and drying frees up operator time and improves production flow in the workshop.

• Even powder deposit across the full width
  Powder spreads evenly. The DTF transfer remains consistent, without overload or missing areas.
• Reduced DTF powder waste
  Excess DTF powder is automatically recovered and returned to the circuit. Powder consumption decreases and material costs stay under control.
• Less operator intervention
  Film moves from DTF printing to powdering, then drying, without intermediate handling. Error risk decreases, and the operator can focus on other production tasks.
• Consistent quality across production
  Each DTF roll is processed under the same temperature and speed conditions. Output remains identical from the first metre to the last.

Compatibility and integration in DTF lines

The Schulze 600 V3 powder shaker dryer is compatible with all 60 cm roll-width DTF printers.

Compatible with roll-fed DTF printers up to 60 cm

The film exits the printer and enters directly into the Schulze powder shaker dryer, without adaptation or specific connection. The format matches current DTF production standards.

Works with standard DTF rolls

The machine is compatible with standard DTF rolls. No specific format is required, as long as the width does not exceed 60 cm.

Compatible with DTF hot-melt powders

The DTF powder shaker dryer accepts standard hot-melt powders without specific brand or reference restrictions.

The powdering system requires only a small amount of DTF powder, around 0.5 kg, to operate.

Manufactured in the EU, the machine meets CE and RoHS standards and ensures a high level of quality and safety.