zoom_in
-10%
Screen Printing Film Positive Conversion Kit for Epson SC-T3200 and SC-T5200
- Reference: MTP-KIT-T3200
€622.80 Tax excluded €692.00
Description
The Screen Printing Film Positive Conversion Kit for Epson SC-T3200 and SC-T5200 contains five refillable cartridges, a maintenance tank, 3 litres of high-opacity black ink, a roll of film and a small funnel. It suits workshops that already own one of these two Epson printers and want to print their film positives in-house. The printer is not supplied. The film changes with the model: 61 cm for the T3200, 91 cm for the T5200.
What does the conversion kit contain?
The conversion kit has five items.
| Item | Quantity | Details |
|---|---|---|
| Refillable cartridges | 5 | 700 ml each, with chip, for Epson SC-T3200 and SC-T5200 (cyan, magenta, yellow, black and matte black slots) |
| Maintenance tank | 1 | For Epson SC-T3200 and SC-T5200 |
| High-opacity anti-UV black ink for film positives | 3 litres | As 3 bottles of 1 litre |
| Inkjet film for film positives | 1 roll | T3200: 61 cm x 30 m. T5200: 91 cm x 30 m |
| Small funnel | 1 | For filling the cartridges |
Which Epson printers does this kit convert?
The conversion kit fits the Epson SC-T3200 and SC-T5200, two large-format printers of 24 and 36 inches. Cartridges and tank match both models, and each printer takes film at its own width. A T3200 or T5200 already installed in the workshop becomes a film positive printer without changing machine. The Film Positive Printer for Screen Printing EPSON SC T3200 and EPSON SC T5200 Screen Printing Film Printer pages describe each of these two models. Only the ink changes: the refillable cartridges take a high opacity black, which gives dense solid areas on the film.
How is an Epson SC-T3200 or SC-T5200 converted into a film positive printer?
Converting an Epson SC-T3200 or SC-T5200 takes five steps, with the kit at hand.
- Remove the original Epson cartridges;
- Fill the five refillable cartridges with black ink, funnel in hand, always leaving at least about 1 cm empty;
- Put the refillable cartridges back into the printer;
- Run cleaning cycles, as many times as needed, until the black is a true black;
- Adjust the print settings for film.
Each cleaning cycle sends a little ink into the T6193 compatible maintenance tank for Epson screen printing film printers. It is better to replace the tank before it is full, so that printing is not interrupted halfway through a job.
Why convert an Epson with this kit?
A good film positive depends on a dense black that stops the light of the exposure unit. The Special Black Screen Printing Ink for Film positives plays that part: it limits hardening of the emulsion in areas that need to stay clear, and it dries quickly on most PET films. The 700 ml Refillable Epson T3200-compatible cartridges for screen print film output take the place of the original ones. They can be refilled several times and keep a built-in chip that tracks the ink level. Because ink is poured by the litre, the cost per print drops. As for film, a roll 61 cm or 91 cm wide follows the printer model.