• Film positive conversion kit for Epson SC-T3405 and SC-T5405: refillable cartridges, tank, black ink and film
  • Numbered contents of the film positive conversion kit for Epson SC-T3405 and SC-T5405
Film positive conversion kit for Epson SC-T3405 and SC-T5405: refillable cartridges, tank, black ink and film zoom_in -10%

Screen Printing Film Positive Conversion Kit for Epson SC-T3405 and SC-T5405

  • Reference: MTP-KIT-T3405

€648.00 Tax excluded €720.00

In stock

Screen Printing Film Positive Conversion Kit for Epson SC-T3405 and SC-T5405: refillable cartridges, tank, ink and film.

Description

The Screen Printing Film Positive Conversion Kit for Epson SC-T3405 and SC-T5405 gathers everything needed to print film positives on a printer already in the workshop: four refillable chipped cartridges, a T6997 maintenance tank, three litres of high-opacity black ink, a roll of film and a small funnel. The printer itself is not supplied. Film width follows the machine: 61 cm for the T3405, 91 cm for the T5405.

What is included in the conversion kit for the T3405 and T5405?

Five items make up this conversion kit.

Kit items for the T3405 and T5405, with film width
ItemQuantityDetails
Refillable cartridges 4 With chip, for the cyan, magenta, yellow and black slots of the Epson
Maintenance tank 1 T6997 reference, for the T3400 / T5400 series
Black film positive ink, high-opacity and anti-UV 3 litres Three bottles of 1 litre each
Inkjet film for film positives 1 roll 30 m long: 61 cm wide for the T3405, 91 cm for the T5405
Small funnel 1 Makes filling the cartridges easier

Does this kit convert the Epson SC-T3405 as well as the SC-T5405?

The conversion kit equips the Epson SC-T3405 (24 inches) and the Epson SC-T5405 (36 inches) alike. Cartridges and tank are common to both models; only the film roll changes in width. A machine already in place in the workshop moves on to film positive printing without being replaced. Each model has its own page: the Epson SC-T3405 screen printing positive film printer + Conversion kit for the T3405, and the Epson SC-T5405 printer modified for screen printing for the T5405. As for ink, a high-opacity black takes the place of the original colours in the refillable cartridges and gives dense solid areas on the film.

How is an Epson SC-T3405 or SC-T5405 turned into a film positive printer?

Turning an Epson SC-T3405 or SC-T5405 into a film positive printer takes five steps, with the kit open on the workbench.

  1. Take the original Epson cartridges out of their slots;
  2. Fill the four refillable cartridges with black ink using the funnel, keeping at least 1 cm of space at the top;
  3. Slide the refillable cartridges into the machine;
  4. Run cleaning cycles until the black turns out truly deep;
  5. Adjust the print settings for film.

Each cleaning cycle sends a little ink to the T6997 Maintenance Tank Compatible Epson T3400 / T5400 Series. Changing it before it is full avoids a stop in the middle of a job.

What does this kit bring to an Epson SC-T3405 or SC-T5405?

The kit brings a dense black to the Epson SC-T3405 or SC-T5405, the condition for a film positive to stop the light of the exposure unit. The Special Black Screen Printing Ink for Film positives keeps clear the emulsion areas that must not harden, and it dries fast on common PET films. The Refillable Ink Cartridges Epson T3400 / T5400 with Chips take the place of the original cartridges: they can be refilled several times, and the built-in chip is still recognised by the printer after each refill. Buying ink by the litre lowers the cost per print.

In the same category

10 other products seleted for you