zoom_in
PMI RED Tape universal screen printing adhesive
- Reference: PMI-Red-Tape
€12.50 Tax excluded
Description
PMI RED Tape #560 is a 7.62 cm universal adhesive tape for screen printing. It stays compatible with all inks and emulsions. PMI Tape engineers technical tapes for screen printing production.
This tape uses a brand-new adhesive, unlike the other PMI tapes. Its formula flows deep into the mesh weave. It delivers strong adhesion even on long automatic runs. The tape does not lift during printing.
The adhesive holds firmly through the run, then peels off clean. It leaves no residue on the mesh at reclaim. The stencil stays intact for reuse. Strong hold and clean removal are no longer a trade-off.
Its compatibility covers the whole shop. It works with plastisol, water-based, discharge, HSA and UV inks. It releases without lifting the stencil on photopolymer, diazo or capillary film. One tape replaces several specialist references.
This versatility simplifies shop inventory. A single reference covers every job. It cuts stockouts and ordering mistakes. The screen printing station gains clarity and speed.
Its performance stays stable in any condition. It does not vary with humidity or shop temperature. The PMI RED Tape universal screen printing adhesive also sets screens apart on the rack. It flags active screens or screens tied to one ink.
RED Tape is the universal tape of the PMI range. To protect only the inner frame edges, the screen frame protection tape works well. To mask wide areas on a single ink, the screen masking tape is enough. The RED completes the PMI screen printing supplies range.
PMI RED Tape universal screen printing adhesive features
- Universal adhesive tape, 7.62 cm wide;
- Compatible with all screen printing inks;
- Compatible with all emulsions and stencils;
- Strong adhesion on long automatic runs;
- Residue-free removal, stencil safe at reclaim;
- Red film to flag screens on the rack.
PMI RED Tape #560 technical specifications
- Width: 7.62 cm, 55 m roll;
- Backing: red BOPP film, stable under tension;
- Adhesive: UV-cured formula, no transfer;
- Adhesion: 16 oz/in, above standard tapes;
- Tensile strength: 24.94 oz/in;
- Total thickness: 2.8 mil, clean hand tear.
PMI RED Tape #560 FAQ
How does it differ from other PMI tapes? The #560 uses a brand-new adhesive, compatible with all inks and emulsions.
Does it suit water-based inks? Yes. It holds against plastisol, water-based, discharge, HSA and UV.
Does it leave residue? No. The adhesive peels off clean and protects the stencil at reclaim.
What is BOPP film? An oriented polypropylene, stable under tension, that tears clean without fraying.
Why a red film? The colour sets screens apart on the rack without transferring onto the mesh.
