zoom_in
PMI Dual Tack pallet tape for screen printing platens
- Reference: PMI-Dual-Tack-Pallet-Tape
€70.00 Tax excluded
Description
PMI Dual Tack Pallet Tape #380 is a 38 cm x 33 m pallet tape for screen printing. It holds garments on the platens of manual and automatic carousels. PMI Tape stands among the major makers of screen printing tapes.
This double-sided adhesive paper covers the platen surface. The garment sticks flat and stays set through the print. It does not shift under the squeegee stroke. Colour registration stays sharp on every station.
Its real strength is replacing spray adhesive. The tacky surface stays contained on the paper. Nothing drifts onto the screens or the press arms. The mesh no longer clogs, and the shop stays clean.
A single strip covers a standard adult platen. The liner peels off at application, then the paper bonds down. Its tack lasts through many prints before replacement. This repeated hold cuts the cost per garment.
The paper takes a wide range of garments and inks. It holds t-shirts, fleece and hoodies on the platen. It works with plastisol, water-based and discharge inks. Removal is clean, with no solvent or residue on the platen.
This tape equips the platen, not the frame. To protect the inner frame edges, the screen frame protection tape completes the station. To mask wide screen areas, the screen masking tape fits. This paper joins the PMI screen printing supplies range.
PMI Dual Tack Pallet Tape features
- Double-sided adhesive paper, 38 cm x 33 m;
- Holds garments flat on the platen;
- Replaces spray adhesive, no overspray drift;
- One strip covers a standard adult platen;
- Tack lasts through many prints per application;
- Peels off the platen with no solvent or residue.
PMI Dual Tack Pallet Tape FAQ
Why replace spray adhesive? The tacky surface stays contained, with no drift onto screens or press arms.
How many prints per application? Many prints, depending on garment and ink, before the strip is replaced.
Which garments does it hold? It holds t-shirts, fleece and hoodies on the screen printing platen.
Will it damage the platen? No. It peels off the platen clean, with no solvent or residue.
