There are 14 products.
Showing 1-14 of 14 item(s)
DTF Cleaning Solutions
Manutech-Print, specialist in supplies for DTF - Direct To Film printing, offers professional DTF cleaning solutions to keep your print heads in perfect condition. Our products guarantee consistent print quality, prevent nozzle clogging and extend the lifespan of your printers. Discover our complete range adapted to all maintenance levels and production volumes.
DTF Printer Maintenance: A Critical Priority
Regular maintenance of DTF printers is a determining factor for your textile workshop's profitability. Print heads represent the most sensitive and costly component, with replacement costs ranging from 900€ to 1500€ depending on the model.
DTF pigmented inks, thicker than traditional inks, require heightened vigilance. Lack of maintenance quickly leads to: horizontal banding, smudging, clogged nozzles and costly production downtime.
Preventive maintenance with appropriate DTF cleaning solutions reduces print head failure risks by 80%. Maintenance investment represents less than 2% of operating costs. DTF print head cleaning is therefore not optional, but essential to ensure continuity of your textile production.
Our Range of DTF Cleaning Solutions
Manutech-Print offers three professional cleaning solutions adapted to each maintenance level.
DTF Cleaning Solution – Daily Maintenance
DTF soaking fluid for daily use. Pour into the capping station to keep heads moist between print runs and prevent ink from drying. Available in 1L and 5L formats. Essential for workshops in continuous production.
Extreme Cleaning Solution DTF – Remedial Cleaning
Powerful solution for partially clogged heads. Print banding? Faulty nozzles? Extreme Cleaning Solution dissolves dried ink deposits and restores print quality. Compatible with DTF and DTG. Use at first signs of clogging or for weekly preventive cleaning.
Ultra Cleaning Solution DTF/DTG – Ultimate Unclogging
The unclogging solution with maximum strength for totally blocked heads. Last resort before replacement (saving £800-1,400). Compatible with DTF and DTG. Generally enables print head recovery even after severe clogging or prolonged disuse.
Choosing the Right Solution for Each Situation
Your choice of DTF cleaning solution depends on the clogging level of your DTF print heads.
Daily preventive maintenance Integrate Cleaning Solution into your daily routine. Pour into the capping station at end of each day to prevent clogging. Run a nozzle check pattern at start-up to verify all nozzles.
Problem detected (banding, smudging, missing nozzles) Switch to Extreme Cleaning Solution, your intermediate remedial solution. This capping station cleaning solution works in 15-30 minutes. Perform a test print after application.
Totally clogged print head Ultra Cleaning Solution represents an extreme unclogging attempt before replacement. For severe DTF head unclogging, soaking alone is generally insufficient: flushing operations are necessary. These delicate procedures require experience to avoid permanently damaging the head. We recommend consulting a qualified technician for this type of intervention.
Optimal procedure: Diagnose → Choose appropriate solution → Apply → Test → Move to next level only if necessary.
Complementary Accessories for Optimal Maintenance
Beyond DTF cleaning solutions, professional DTF cleaning accessories optimise your maintenance routine.
Syringes and needles: precise solution injection into capping station or ink circuits for targeted cleaning of clogged areas.
Swabs and cleaning sticks: reach delicate areas, remove dried ink residue from wipers and capping stations without contamination.
Lint-free wipes: clean surfaces without leaving fibres that could cause print defects.
These accessories, combined with our DTF soaking fluids, ensure optimal performance and extend the lifespan of your equipment in continuous production.
Preventive Maintenance Schedule
Rigorous DTF printer maintenance follows a precise schedule to guarantee continuous production without interruption.
Daily: Pour Cleaning Solution into capping station before each machine shutdown. Perform nozzle check pattern at start-up to verify nozzle condition.
Weekly: Thorough cleaning of capping station and wipers. Use Extreme Cleaning Solution preventively to maintain DTF print heads in perfect condition.
Monthly: Complete inspection of ink circuits and preventive DTF print head cleaning with Extreme Solution. General machine verification.
As needed: Ultra Cleaning Solution upon detection of severe clogging.
This daily maintenance routine drastically reduces breakdown risks and guarantees the longevity of your investment.
Complete DTF Range from Manutech-Print
Complete your textile printing workshop with our professional range:
Our DTF cleaning solutions integrate seamlessly into your working environment to guarantee optimal performance of your equipment and ensure valuable time savings on your textile production.
Read more
expand_more